Pelletier  Granulator / Refiner

• Rotor:  Heavy duty shaft.  Machined, robust and very efficient rotor.
• Hood:  Equip with :     1 electromechanical actuator for ease of operation when opening and closing hood.
                                 Two abrasion resistant interior plate, easy to replace.
• Exit:  Three (3) different bases of exit available :  aspirator,  conveyor,  drawer
• Rotary and anvil knives:  Made with high impact steel
• Screen:  One abrasion resistant steel screen with a choice of hole size
• Drive:  2  inertia wheels (one of this wheel is machined for a pulley 5V)
• Safety equipment:  Safety limit switch prevent operation when servicing
• Application :  Compost, rubber, aluminium, copper, oil filter, PVC, plastic, polycarbonate, wood fibres

	Model 318-AF	Model 636-AF	Model 954-AF
Motor	20 or 30 H.P. 575 volts	50 or 60 H.P. 575 volts	75 or 100 H.P. 575 volts
Starter	20 or 30 H.P.	50 or 60 H.P.	75 or 100 H.P.
Rotary knives	Qty : 18	Qty : 36	Qty : 54
Anvil knives	Qty : 2	Qty : 4	Qty : 4
Grinding capacity	1,000 – 3,000 pounds/hr    454 – 1,363 kg/hr	2,000 – 6,000 pounds/hr    909 – 2,727 kg/hr	3,000 – 10,000 pounds/hr 1,363 – 4,545 kg/hr
Opening dimensions	11" x 14"	20" x 14"	29 1/2" x 14"
Overall dimensions	Height : 80" Width : 36" Length : 67"	Height : 80" Width : 48" Length : 73"	Height : 80" Width : 60" Length : 78"
Compulsory feed (mechanic fuller) • Amps control • Augmentation of  30%  on regular production	Motor/Transmission 1/2  H.P.  575 volts	Motor/Transmission 1  H.P.   575 volts	Motor/Transmission 1 ½  H.P.   575 volts
Weight	3,000 pounds	5,300 pounds	6,300 pounds

Model 954 H.D.

• Rotor:  Heavy duty shaft.  Machined, robust and very efficient rotor.
• Hood:  Equip with : 1 electromechanical actuator for ease of operation when opening and closing hood.
                             Two abrasion resistant interior plate, easy to replace.
• Exit:  Three (3) different bases of exit available :  aspirator,  conveyor,  drawer
• Rotary and anvil knives:  Made with high impact steel
• Screen:  One abrasion resistant steel screen with a choice of hole size
• Drive:  2  inertia wheels (one of this wheel is machined for a pulley 5V)
• Safety equipment:  Safety limit switch prevent operation when servicing
• Application :  Compost, rubber, aluminium, copper, oil filter, PVC, plastic, polycarbonate, wood fibres
  
  
  
  
  
  
  
  

	Model 318 H.D. or Reg.	Model 636 H.D. or Reg.	Model 954 H.D. or Reg.
Motor	20 or 30 H.P. 575 volts	50 or 60 H.P. 575 volts	75 or 100 H.P. 575 volts
Sarter	20 or 30 H.P.	50 or 60 H.P.	75 or 100 H.P.
Rotary knives	Qty : 18	Qty : 36	Qty : 54
Anvil knives	Qty : 2	Qty : 4	Qty : 4
Grinding capacity	800 - 2,000 pounds/hr 364 - 909 kg/hr	1,500 – 4,000 pounds/hr    682 – 1,818 kg/hr	2,500 – 7,000 pounds/hr 1,136 – 3,182 kg/hr
Opening dimensions	11" x 22"   or   11" x 15"	20" x 22"  or  20" x 15"	29 1/2" x 22"  or  29 1/2" x 15"
Overall dimensions	Height : 63" Width : 36" Length : 60"	Height : 75" Width : 48" Length : 65"	Height : 109" Width : 66" Length : 70"
Weight	2,700 pounds	4,550 pounds	5,500 pounds

The four (4) fixe knives are adjustable and sharpening
Ex. : At the sharpening, if we remove .050, we can sharpening 10 times

For the rotary knives, They will be adjustable and sharpening 10 times at .050 each time

We anticipate a life time :  up to 18 months