Pelletier Tire primary line
AVANTAGES
- Safe
- Easy to operate, Reliable
- Need little maintenance
Pelletier Truck Tire Debeader
Model 18 – 24.5
The best way to remove bead of truck tire.
- Hydraulic power unity : Motor 20 H.P. 575 volts 3 ph
- Joy stick with proportional valve
- Solenoid valve
- Electrical joy stick with solenoid valve
- Capacity: Up to 40 tires/hour
- Air cylinder, arm lever for facilitate the loading of tires equip with air foot control
- 2 hydraulic motors
- Adjustment guide for cut bead or side wall height
- The sharpening of the circular knife is done right in place
- Dimensions : Height 53"
Width 116"
Length 115" - Color : Green
- Weight: 2,800 pounds
Pelletier Car & Truck Tire Slitter
Model 5H 13 – 24.5
This machine cut car & truck tire in strips.
- Motor / Transmission variable speed 5 H.P. 575 volts 3 ph
- Capacity : Up to 100 car tires/hour
Up to 30 truck tires/hour - Tire support driving wheel
- Air cylinder, arm lever for facilitate the loading of tires equip with air foot control
- Electrical foot feed control, start and stop
- Manual adjustment guide for different width of strip
- Manual adjustment for height of circular knife
- Finger gage for good adjustment height of circular knife
- The sharpening of the circular knife is done right in place
- Tire retainer arm lever
- Electrical panel box equip with safety key
- Dimensions : Height 66"
Width 84"
Length 73" - Color : Green
- Weight : 2,000 pounds
Pelletier Tire Chopper
Model 60-40-C20
The best way for cut rubber strip
- Motor : 20 H.P. 575 volts 3 ph
- Cutting speed : 94 feet / min.
- Input dimension : 5" x 3"
Cutting length : 2" - Rotary knives (Qty : 2) : Made with high impact steel (2 cutting edges)
- Anvil knife (Qty : 1) : Made with high impact steel (4 cutting edges, reversible)
- Arm lever release of material
- Frame mounted on strong steel
- The drive rollers are specially built to catch and guide the rubber strip to the knives
- Safety limit switch prevent operation when servicing
- Easy access for replacement and adjustment knives
- Output material conveyor with motor / transmission 1/3 H.P. 575 volts 3 ph
- Dimensions : Height 75"
Width 55"
Length 63" - Color : Green
- Weight : 3,200 pounds
Pelletier Car Tire Debeader
Model 13 – 17.5
The best way to remove bead of the car tire.
- Hydraulic power unity : Motor 7.5 H.P. 575 volts 3 ph
- Joy stick with proportional valve
- Solenoid valve
- Capacity : Up to 100 tires/hour
- 2 hydraulic motors
- Adjustment guide for cut bead or side wall height
- The sharpening of the circular knife is done right in place
- Dimensions : Height 51"
Width 42"
Length 65" - Color : Green
- Weight : 1,800 pounds